Welcome To Visit SHENZHEN AUTOSTRONG INSTRUMENT CO.,LTD!

Tel
0086-(0)755-26978980
HOME > Company News

Surface Temperature Probe Operation Manual

source:AUTOSTRONGwriter:AUTOSTRONGpopularity:pubdate:2016-06-15 17:21【big middel small

 
             Surface Temperature Probe Operation Manual

1.Introduction
This test probe for measurement of surface temperature is designed and manufactured according
to IEC60035-2-6 Figure 104 standard and similar other international standards.This probe is mainly
used for test and inspection the temperature rise accessible ability of front and side electric stove and
oven.The probe for measurement of surface temperature has a 4N thrust in accordance with the
standards requirements.


 
2.Technical Parameter:
Model AUTO-TMT
Copper sheet Brass with 5mm diameter and 0.5mm thickness
Thermocouple American OMEGA,k type thermocouple with 0.3mm diameter
Insulation pipe Polycarbonate with 3mm inner diameter and with 5mm outer diameter
Handle POM with 4N thrust
REference Reference IEC60035-2-6 Figure 104
3.Operation Manual :
1). This test should be taken after the black test corner test;

2). Please use the test probe for measuring after electrifying running 60min or reaching a steady statement;

3).Press the head of the probe on the tested device surface and thrust 4N force,then read the digital until the temperature stability.