Integral Battery Safety Control System-SHENZHEN AUTOSTRONG INSTRUMENT CO.,LTD

AUTOSTRONG
Product center

Battery Tester

Telephone：0086-(0)755-26978980

Email：Sales@hkauto.com.cn

Address:4F, I Building, Huafeng High Tech Industry Zone, Shajing Town, Baoan District, Shen Zhen City,P.R.China. Zip Code:518104

HOME > Battery Tester

prevnext

View

Integral Battery Safety Control System

Description:Integral Battery safety control system is mainly applied to test battery performances when battery in hazard environment or damaged externally by electrical test and mechanical test, which is introduced by research institute and battery manufacturers

Application Technical Parameter Reference Standards

Available to customize by increasing or reducing testing projects in compliance with customers’
demands or different standards;

One Control cabinet to control all testing systems;

Compartment design can be available to make all equipment in same height with the advantage
to reduce to time , cost and mobile to move & upgrade test equipment.

Model	AUTO-BSCS
Items	Test Method
Crush	The test battery is placed between two planers and approximate 13KN crush force can be performed through hydraulic arm with an 32 mm diameter piston or bench clamp; The crush remains till hydraulic pressure reading data up to 17Mpa. Once crush force reached and system will release automatically;
Nail Penetrate	Battery specimen is placed and fixed in a planner, nail penetration speed at 10mm ~ 40mm remains to setting time and pull out steel nail automatically to complete test.
Impact	Battery specimen is placed on a planar, a bar with its diameter is placed on the center of the battery specimen, a weight at 9.1kg drop onto battery specimen from height of 610mm. Battery crush is placed onto shock bench, a weight drop free from a height of 100mm to hit the fixed battery (the max. Area side is vertical to bench)
Low Air Pressure	Battery is placed into vacuum oven after recharged. After sealed, reduce air pressure less than and equal to 11.6Kpa (altitude at 15240m) and remain 6hours for testing.
Free Drop	Battery specimen drop free from a height of 100mm onto the concrete. Each side of battery for drop test, total 6 tests
Short Circuit	In a condition of 55±5℃, battery is connected to thermal coupling (contact of thermal coupling is fixed onto the center of the max. area side of battery) and placed in vent cabinet and make circuit-circuit for positive pole and negative pole with short-circuit of 80mΩ±20mΩ, any condition listed below will stop test: A.. Battery temperature drop to 20% of peak value; B.Short-circuit time reaches 24 hours
Thermal Shock	Battery is placed in hot oven with temperature rises at a rate of(5±2)℃/min to (150±2)℃ and remain 30 min.
Burning	Battery is placed in a hole with its diameter 4 inches and a cover place onto the plane bench. The cover plate is made of 20 holes per inch steel mesh or steel wire at 0.017 inch (0.43mm); a mesh screen with 8 sides at size of 2 inches(610mm width) and 1 inch (305mm height) is surrounded; The metal mesh is made of 16-18 wires per inch with wire diameter of 0.010 inch (0.25mm) metal wire. Specimens is placed onto metal mesh , cover on the central hole and heat to explode or damage.

* necessaryOnline Message：

* Webpage：	Automatic acquisition
* Your Name：	Please enter your name
Tel：	Please enter your telephone
* Your E-mail：
* Message：
	Please enter the number and description in order to send your product。
code：

Welcome To Visit SHENZHEN AUTOSTRONG INSTRUMENT CO.,LTD!

Material Flame Test Machine

IEC60529 IPXX Test Equipment

Household Safety Appliances

Wire Cable Test Machine

Mechanical Strength Tester

Accessibility Probes ,Fingers

Universal Testing Machine

Environmental Test Chamber

IEC62368 Standard Tester

VDE0620 Test Gauges

UL498 Test Gauges

IEC60061 Test Gauge

Withstanding Voltage Tester

Switch Life Tester

EMI EMC Tester

Plug and Socket Test Gauges

Toy tester

Freezing Load Test Package

Concrete Test Hammer

Battery Tester

Integral Battery Safety Control System