Material Flame Test Machine
IEC60529 IPXX Test Equipment
Household Safety Appliances
Wire Cable Test Machine
Mechanical Strength Tester
Accessibility Probes ,Fingers
Universal Testing Machine
Environmental Test Chamber
IEC62368 Standard Tester
VDE0620 Test Gauges
UL498 Test Gauges
IEC60061 Test Gauge
Withstanding Voltage Tester
Switch Life Tester
EMI EMC Tester
Plug and Socket Test Gauges
Toy tester
Freezing Load Test Package
Concrete Test Hammer
Battery Tester
Contact Us
Telephone：0086-(0)755-26978980
Email：Sales@hkauto.com.cn
Address:4F, I Building, Huafeng High Tech Industry Zone, Shajing Town, Baoan District, Shen Zhen City,P.R.China. Zip Code:518104
IEC60335-1-21.2 Scratch Resistance Tester
Description:Scratch resistant coating test uses a hardened steel needle to scratch, the ends should be tapered needle, an apex angle of 40 °, the tip should be rounded polished, rounded with a radius of 0.25mm ±0.02mm.
Application
Technical Parameter
Reference Standards
Scratch resistant coating test uses a hardened steel needle to scratch, the ends should be tapered needle, an apex angle of 40 °, the tip should be rounded polished, rounded with a radius of 0.25mm ±0.02mm.
Scratches through five pairs of conductive parts, including where the interval, the middle interval should be subject to the greatest potential gradient at the site of the test. When the scratch test, maintaining 80-85 ° with the horizontal plane in the needle, the speed of 20mm / s ± 5mm / s were scratches.
Of the needle should be combined with the appropriate load, so that the needle along its axial direction to exert a force of 10N ± 0.5N, scratches each interval is at least 5mm, and the edges of the sample are separated by at least 5mm.
Scratches through five pairs of conductive parts, including where the interval, the middle interval should be subject to the greatest potential gradient at the site of the test. When the scratch test, maintaining 80-85 ° with the horizontal plane in the needle, the speed of 20mm / s ± 5mm / s were scratches.
Of the needle should be combined with the appropriate load, so that the needle along its axial direction to exert a force of 10N ± 0.5N, scratches each interval is at least 5mm, and the edges of the sample are separated by at least 5mm.
* necessaryOnline Message：
